designed
to provide maximum rack mounting space, both above and
below the desk
Profile A - Profile A Console presents 12RU (535mm) of usable height in the viewing area, and up to 10RU (445mm) below the desk. Allowance should be made for deep equipment mounted in the upper section encroaching down into the lower section. (Refer to
drawing for details). The section under the desk is accessed by the drop-down front door or the rear metal door, both of which are lockable. The reardoor can be supplied left or right-hand hinged.
Profile B - Profile B is a bench top style console and comes with 13RU (580mm) of usable height below the desk. This console is frequently specified for use in conjunction with other profiles and often used at the ends of a composite console to accommodate printers, fax machines etc.
For tractor feed paper, the desktop can have a paper slot, which allows the paper to be fed from below the desk; it can also accomodate a cable entry bung. This should be decided at the time of ordering. Freestanding monitors can also be used with this profile.
Profile C - Profile C offers the same above and below desk usable spaces as the profile A, with a further 8RU (355mm) area above. This is generally used for additional smaller monitors, often two C.C.T.V. units mounted side by side. It also suits equipment that is not suited to inclined mounting.
Profile D - Profile D is similar to Profile A design – providing 12RU above the desk and 10RU below the desk. The top of the Console is
horizontal, making it suitable to placing objects on. Care should be taken to avoid blocking the air outlet vents.
Profile E - Profile E is similar to profile C but with the upper section facing the operator more squarely and consequently ergonomically
preferred.
Profile F - Profile F is an individual design providing 6RU of space above the desk in a unique angled design and a further 10RU of space above that. 10RU is also provided below the desk. Due to the design of the desk, this Console cannot be bayed with other profiles. The 6RU (266mm) section beyond the desk accommodates switch panels, handset speakers etc. The monitor area is the same as the Profile A, however there is additional space below the desk.
Profile G - Profile G is similar to profile E with 12RU above the desk, 8RU in the middle section, 7RU of space in the top section and 10RU below the desk. This console has three separate monitor areas and is ideal where this is a prime requirement. The “above desk” section is
again similar to Profile A and generally is used for a large primary monitor, whilst the upper sections house the smaller secondary
units, often C.C.T.V. type applications. |
